Melrose Motorsports C3 LSx Smooth Flow Headers
		The C3 LSx swap headers feature 1-3/4" primaries into a 3" slip fit collector. Stout 3/8" CNC cut flanges. O2 bungs are located in the collector. Passenger side header maintains excellent clearance from the idler arm unlike so many other aftermarket headers. There is also plenty of room between the number 8 primary and the AC evaporator box. The collectors are intentionally angled in towards the center of the car since the exhaust must pass through the transmission crossmember. These headers were specifically designed for this swap. These headers will work with Speedhound Performances Zbar bracket so can retain your factory manual clutch. Headers are available coated or uncoated. Speedound Perf. has now determined that the headers will clear Steeroids rack and pinion system and should also clear VBP's Rack Attack system when using their C3 swap plates. Project pictures provided by: John's Customs in Santa Clara, California / '69 LS7 Josh Powers of Iowa / '82 416 stroker LS3 Trey at Speedhound Performance http://www.speedhound.com/